PP melt index instrument using automatic sampling, balance weighing method, according to the formula to determine the volume of thermoplastic melt flow rate (MFR)

Test criteria:
ISO 1133, ASTM / D1238-98, GB / T3682, GB / T9643, GB / T3682, JB / T5456, ISO1133, GB / T3682-2000

Applications:
(PE), polypropylene (PP), POM (POM), polystyrene (PS) ABS resin, polycarbonate and other low melting temperature of the plastic Determination. Widely used in plastics, plastic products, petrochemical industry and related universities, research institutes, commodity inspection departments.

Detection principle:
Plastic melt index instrument, also known as melt flow rate meter, is a plastic extrusion device, the measured thermoplastics placed in the cylinder of the instrument, as early as the temperature, with a furnace to reach the molten material, and The extrudate is converted to the melt by mass flow MFR (G / 10MIN) of the standard die every 10 minutes or the extrudate is converted into a melt 10 minutes through the standard die volume flow MNR (CM3 / 10MIN), with the measured object in the molten state of the mobility, viscosity and other physical properties.

Main feature:
1, heating speed, ultra-adjustable very small
2, high temperature accuracy
3, after the filler, can quickly restore the temperature state
4, test parameters calibration and easy to amend
5, can be used manual, automatic cutting test method
6, Chinese liquid crystal display
7, with a printer, the test results will automatically print out
8, accurate measurement data, simple operation, intuitive and clear, stable and reliable performance

Technical Parameters:
1, squeeze out the material part
Outlet diameter: Φ2.095 ± 0.005 mm, outlet length: 8.000 ± 0.025 mm
Feeding tube diameter: Φ9.550 ± 0.025 mm, the length of the barrel: 152 ± 0.1 mm
Piston head diameter: 9.475 ± 0.015 mm, piston rod length: 6.350 ± 0.100 mm
2, the standard test load (a total of 8 full set of weights)
3, the temperature range: conventional room temperature - 400 ¡æ (500 ¡æ optional)
4, constant temperature accuracy: ± 0.5 ¡æ
5, display resolution: 0.1 ¡æ
6, cutting method: optional manual or automatic cutting material
7, the temperature recovery time: less than 4 minutes
8, print: micro-printer automatic print output
9, the power supply voltage: AC220V ± 10% 50HZ

Qinsun Instruments (Shanghai) Co., Ltd.

Free Member 0 Chinese Supplier