Geosynthetics Falling Penetration Tester / Cone Penetration Tester for the determination of geotextile material resistance from the fixed height of the steel cone penetration ability, the penetration of the penetration of the characterization of the fall of the sharp stone fell on the surface of the geotextile Resulting in damage to the product.

 Brief Introduction:

      Geosynthetics Falling Penetration Tester / Cone Penetration Tester for the determination of geotextile material resistance from the fixed height of the steel cone penetration ability, the penetration of the penetration of the characterization of the fall of the sharp stone fell on the surface of the geotextile Resulting in damage to the product.
Standards compliant:
GB / T17630-1998, ISO13433
The main purpose:
Geosynthetics Falling Penetration Tester / Cone Penetration Tester for the determination of geotextile material resistance from the fixed height of the steel cone penetration ability, the penetration of the penetration of the characterization of the fall of the sharp stone fell on the surface of the geotextile Resulting in damage to the product.
Main structure:
1. By the rack, steel cone free drop device, clamping ring and other components, the rack by the base, column, roof, the middle beam and other devices connected components;
2. There are four adjustable pad under the base, by adjusting the pad feet, so that the bubble in the middle of the bubble, you can make the instrument in a horizontal state;
3. Clamping ring: clamping ring for the flange-type clamping ring, tightened by the root bolt to hold the sample;
4. Steel cone free fall device: the end of the steel cone connected a guide rod, placed on the machine, the frame of the middle beam and the roof are not allowed to affect the rate of steel cone down the guide hole, the middle beam is also equipped with a locking handle The
The main parameters:
1. Test height: 500 ± 2mm;
2. The inner diameter of the holder: 150 ± 0.5mm;
3. Falling cone: cone angle 45 °, the maximum diameter of 50mm, the total mass of 1000g ± 5g;
4. Cone: measuring range 5 ~ 50mm ± 0.1mm, the quality of 600g ± 5g;
5. Dimension: 480 × 560 × 1540mm (L × W × H);
6. Weight: 55kg.

Qinsun Instruments (Shanghai) Co., Ltd.

Free Member 0 Chinese Supplier